CATHAYLIFT Single Mast Vertical Lift Compared To Other Products On The Market
CUP-H series. As for these series, they are specialized in the EU and North America Market, which is very similar to the brands JLG, Genie, and Haulotte, But our high-end models are 3 times cheaper than them, and the working performance and high-end details are the same as their products. There is a socket on the platform that can provide more convenience for aerial working. also, Control Box on the mast, with a power switch, emergency button and outriggers interlock indicator, Aviation plug, wear-resisting cable, etc. Especially the outriggers interlock indicator and aviation plug and single-person loading device, which are not equipped with standard models.
The following are the advantages of our CUP-H series compared with similar products on the market:
|
|
CUP-H series from Shandong Cathay Machinery Co., Ltd |
|
other similar products |
|
Anti- misoperation button |
There are emergency stop, ascending, descending, and public buttons on the control panel; when ascending or descending, you need to hold down the corresponding button and the "public" key to start the ascent and descend. Avoid accidental contact by workers or accidental operation due to the misuse of a single button to start lifting. |
|
Most of them only have two buttons for up and down, some manufacturers have installed anti-misoperation, and almost no manufacturers have four buttons at the same time. |
|
Power supply connected to the platform |
Power tools can be used directly on the platform |
|
No such configuration |
|
Outrigger interlocking |
The platform can only be raised and lowered after the four legs are installed and the ground is stressed. |
|
|
|
Outrigger indicator |
The four outriggers must be properly installed and in place, and the four indicators on the control panel will all light up before the machine can be powered up and down. Resolutely put an end to the safety accidents that occur because the workers do not follow the rules or use the machine without inserting the legs. |
|
Rotating or telescopic legs are used without connection instructions; the platform can be raised even if not fully supported |
|
Aluminum alloy support legs |
Aluminum alloy insert-type supporting legs are adopted, with a large contact area and a more stable structure. And the aluminum alloy support legs are maintenance-free for life. |
|
With the use of turn-out iron legs, only two points connected to the base, the structure is unstable, and easy to rust, causing potential safety hazards. |
|
A single person can load the device |
The equipment can be loaded onto the freight vehicle by a single person, reducing the cost of loading and unloading. |
|
Without auxiliary wheels for loading, forklifts are required for loading and unloading. Single loading is not possible. |
|
Standard forklift hole |
All products are designed with standard forklift holes for easy loading and unloading. The center of gravity of the aluminum alloy platform is unevenly distributed. If there is no forklift hole, there will be a high probability of tipping during transportation, which is likely to cause equipment damage and personal injury. |
|
The body has no forklift hole design, and the loading and unloading equipment is extremely inconvenient: on the one hand, the forklift is easy to damage the hydraulic system at the bottom of the machine, on the other hand, because the center of gravity of the aluminum alloy platform is unevenly distributed, according to the loading and unloading method of the general forklift driver, this is very likely Equipment damage and casualties. |
|
Back-up wheel for undercard (for single mast lifting platform) |
There are two small wheels at the rear of the undercarriage (at a slightly higher position behind the big wheel), supported by the center big wheel as the of gravity center. When encountering a more minor ridge, the machine body can be moved freely by tilting it slightly. |
|
Basically, there is no such design. If you encounter uneven ground, the cart will be more laborious. |
|
Synchronization on device |
The synchronization device can ensure that during the ascent or descent process if there is a slight obstacle inside the mast, each mast can be raised or lowered synchronously |
|
Without a synchronization device, the mast of the aluminum alloy may be out of synchronization during ascent or descent. If the two-post platform is out of synchronization, the platform frame may tilt to one side. |
|
Signal line |
Highly flexible towline cable, bending life: 50 times/minute,> 5 million times, anti-shallow water, oil, UV, weather resistance, cold resistance, wear resistance, can withstand heavy mechanical external forces |
|
Extruded wires are generally used, and there is more relative movement between aluminum alloys. Long-term use will cause internal fractures. |
|
Guide devise between the columns (slider, guide wheel) |
The polymer self-lubricating slider and imported nylon wheel are used between the columns, which is free of lubrication and avoids the abrasion of the internal material of the aluminum alloy caused by long-term use, resulting in equipment instability. |
|
Most domestic products use plastic guide wheels to save costs. The guide wheel and the column are in point contact (the contact surface has only 2 points). Long-term use will cause the frame of the column and the machine to shake significantly, affecting the work quality and mood of workers in high places. Security is relatively low. |
|
Explosion-proof valve |
Prevent the platform from falling due to the bursting of the tubing. |
|
The oil cylinder is directly connected to the oil pipe, and there is no explosion-proof device. Once the oil pipe bursts, the platform frame falls immediately. |
|
Seals |
NOK seals; have an excellent sealing effect and are durable. |
|
Low-cost seals have a short service life and poor sealing effect. Frequently cause leaks. |
|
Support column |
The width of the column determines the degree of shaking after the platform is raised. We use a 200mm high-strength aluminum alloy ultra-wide column to ensure that the operating table shakes less. |
|
186mm (or below) ordinary aluminum alloy column, because of low cost, there is no guarantee of material quality. The degree of sway is stronger than that of mid-range products, which seriously affects the psychology of the workers and has potential safety hazards. |
If you're in the market for an indoor aerial work platform that can handle a variety of projects, then look no further than the CUP series single mast vertical lift range from 7m to 14m. This machine is designed to meet all of your aerial work needs, and its compact size allows it to easily pass through doors and adapt to elevators, making it ideal for confined spaces.
One of the best things about this lift is its extremely lightweight design, which makes it easy to load, move, and set up by just one person. It can also be towed by a trailer or a van, making it even more versatile. Despite its small size, it has stabilizers with rubber, which allows it to work on a variety of fragile grounds without causing damage.
One of the standout features of this lift is the advanced design structure from the United States, which ensures that it is safe to use. Additionally, a polytetrafluoroethylene trap is used between the columns. PTFE has high self-lubricating properties, which can avoid the wear between aluminum alloy and aluminum alloy caused by long-term use so that the aluminum alloy and the slider are maintenance-free for life.
The lift also uses American Parker/Japanese NOK seals, which provide a better sealing effect and increased durability. In addition, the American COLSON casters are made of high-grade polyurethane material and are extremely wear-resistant, with a low failure rate. Their service life is more than three times that of ordinary casters, and they cause almost no damage to high-grade stone floors.
The width of the column plays a significant role in determining how much the platform shakes when raised. That's why the lift uses a 200mm high-strength aluminum alloy ultra-wide column to ensure that the console moves less. This provides a more stable work platform and greater safety for the operator.
Finally, the lift is made from 6005T5 high-strength aerospace aluminum alloy, which is supplied by large national-level enterprises to ensure quality. This material is known for its strength and durability, making it perfect for a machine that will see heavy use in various work environments.
In conclusion, if you're looking for a versatile, easy-to-use, and safe indoor aerial work platform, the CUP series single mast vertical lift range from 7m to 14m is an excellent choice. With its lightweight design, advanced features, and quality construction, this lift provides exceptional value and is even much less expensive than your local similar. Whether you're working in a warehouse, factory, or other indoor space, this lift can help you get the job done quickly and safely.
For more information about the single mast vertical lift, welcome to contact us.
Shandong Cathay Machinery Co., Ltd
www.cathaylift.com
Email:sales@cathaylift.com
